决战21点百度影音
  • Street light T60C
  • Street light T60C
  • Street light T60C
  • Street light T60C
  • Street light T60C
  • Street light T60C
  • Street light T60C
  • Street light T60C
  • Street light T60C
  • Street light T60C
  • Street Light - Street light T60C
  • Street Light - Street light T60C
  • Street Light - Street light T60C
  • Street Light - Street light T60C
  • Street Light - Street light T60C
  • Street Light - Street light T60C
  • Street Light - Street light T60C
  • Street Light - Street light T60C
  • Street Light - Street light T60C
  • Street Light - Street light T60C

Edison Street light T60C


1.Streamlined modern design

2.Up to 140 lm/w

3.Tool free maintenance

4.IP65 and 5 years warranty

Inquire Now

Description Parameter
  T60C Edison Series

Product Video

Our new generation Edison fixture (LED Parking Lot lights | Area Lights | Street Lights) light efficiency-140 lm/w ,which can help to reduce more energy consumption. More importantly, its tool free maintenance design can greatly reduce the labor cost and save money. The optional photocell and motion sensor provides sensor providesincreasing the energy savings.

Options

-1-10V dimmable or DALI dimmable

-Photocell

-Motion sensor

Certificates

-American market: UL, cUL

-European market: CE ,RoHS

Product Details

1:Slip fitter mounting

  • 1. Loose the M12 screw from the slip fitter bracket.

  • 2. Bring in the power line through the front part of the slip fitter bracket, then install the bracket part onto the lamp , and tighten the two M6 screws.

  • 3. Pass the lamp input line through the back part of the slip fitter bracket, and then tighten the M12 screws.

  • 4. Connect to power supply AC 100-277V.

  • 5. Install the hole lamp on the pole and tighten four M8 screws.

2:Arm mounting for square pole

  • 1. Remove the screws from the square mounting arm and move the cover plate.

  • 2. Drill holes in the square pole corresponding to the holes on the mounting arm, at the position you want to install the fixture, then bring in the electric supply line through the middle hole into the mounting arm.

  • 3. Put the bracket reinforcement board in the lamp square pole and fix the bracket on the lamp pole through tightening four M8 screws.

  • 4. Bring in the power line through the hole into the arm and fix the lamp on the mounting arm.

  • 5. Tighten 2 M6 screws and then connect the power supply AC 100-277V.

  • 6. Close the arm cover plate through locking 4 M4 screws.

3:Arm mounting for round pole

  • 1. Remove the screws from the square mounting arm and move the cover plate.

  • 2. Drill holes in the square pole corresponding to the holes on the mounting arm, at the position you want to install the fixture, then bring in the electric supply line through the middle hole into the mounting arm.

  • 3. Put the bracket reinforcement board in the lamp square pole and fix the bracket on the lamp pole through tight four M8 screws.

  • 4. Bring in the power line through the hole into the arm and fix the lamp on the mounting arm.

  • 5. Tighten 2 M6 screws and then connect power supply AC 100V-277V.

  • 6. Close the arm cover plate through locking 4 M4 screws.

4:Trunnion mounting

  • 1. Drill two holes in the wall corresponding to the holes ② Install expansion screws.in the mounting bracket, at the position you want to install the fixture.

  • 2. Install expansion screws.

  • 3. Fix the bracket tightly on the installation parts in the wall.

  • 4. Connect the power line and fix lamp on the bracket.

  • 5. Lock two M6 screws tightly and connect the power supply AC 100-277V.

Area of application

Parking lots and streets;Outdoor basketball court and tennis court;Badminton court and football field;The school playground and stadium;Walkways and building grounds;

  • Roads and streets

  • Parking lots


Model Nominal wattages (W) Nominal voltage Rated luminous efficacy (lm/w) Nominal luminous flux (lumen) CRI
T60C-100W-X-Y[with sensor, without sensor] [Round Pole Mount, Square Pole Mount, Slip Fitter Mount, Yoke Mount] 100W AC100~277V 50~60Hz 140±5 14000±500 >70
T60C-150W-X-Y[with sensor, without sensor] [Round Pole Mount, Square Pole Mount, Slip Fitter Mount, Yoke Mount] 150W 140±5 21000±750
T60C-200W-X-Y [with sensor, without sensor] [Round Pole Mount, Square Pole Mount, Slip Fitter Mount, Yoke Mount] 200W 140±5 28000±1000
T60C-240W-X-Y [with sensor, without sensor] [Round Pole Mount, Square Pole Mount, Slip Fitter Mount, Yoke Mount] 240W 140±5 33600±1200
T60C-300W-X-Y[with sensor, without sensor] [Round Pole Mount, Square Pole Mount, Slip Fitter Mount, Yoke Mount] 300W 140±5 42000±1500
Electrical data Photometrical data
Operating frequency 47-63HZ Available light colors warm white;natural white;daylight white
Type of current AC100-277V Available color temperatures 4000K;4500K;5000K
Power factor λ >0.9 Color rendering index Ra >70
Efficiency in % >92% Color rendering index Ra <5
Start time (0.2s / 0.5s / … ) 0.1S UGR (Unified Glare Rating) <27
Warm-up time to 60 % (1.5s / 2s / … ) 0.5S    
Standards & Certification Temperatures & operating conditions
Type of protection IP65 Heatsink temperature -20~+70℃
Tested dielectric strength 3.75KVac Ambient temperature -35~+50℃
Safety features Open circuit protection;
short circuit protection ;
overvoltage protection
Storage temperature -40~+80℃
Certificates UL, cUL,CE ,RoHS    
Energy efficiency class A++ & A++    
Lifespan Features/Capabilities and additional product data
Rated nominal Lifetime 5 Years Base/Socket Directly wired
Switching cycles 100,000 times Dimmable 1-10V dimmable、DALI dimmable
Lumen maintenance at e.o.l. 70%    
Packing Information
Model Dimension CTN SIZE(CM) QTY/CTN Net Weight/pcs(kg) Gross Weight /CTN(kg)
T60C-100W/150W/200W 380*286*99.5 41.5*36.5*17 1PCS 5.2 6.4
T60C-240W/300W 569*314*99.5 60.5*39*17 1PCS 8.3 9.4

Product Dimension


2018, Shenzhen FYT LED Co., Ltd.All Rights Reserved Design by Gemelsoft.
决战21点百度影音